DKLS-WALL TYPE PURE SINGLE WAVE SOLAR INVERTER WITH MPPT CONTROLLER BUILT IN

Short Description:

Pure sine wave output;

Low frequency toroidal transformer lower loss;

Intelligent LCD integration display;

Built-in PWM or MPPT controller optional;

AC charge current 0~30A adjustable, three working modes selectable;

Peak power more than 3 times, full-automatic and perfect protection function;

Added fault code query function, easy to monitor the operation in real time;

Supports diesel or gasoline generator, adapt any tough electricity situation;

Combine industrial and home usage, wall-mounted design, convenient installation

Send email to us

Product Detail

Product Tags

Why do solar panels need inverters?
Solar cells need inverters because their DC output needs to be converted into AC power. The main reason for this is that most of our household appliances need AC power to work properly.

Therefore, the inverter completes the conversion. It receives DC power from solar cells. Then, the inverter uses various electrical and electronic components to oscillate the DC input at a frequency of 50 or 60 Hz. The output of the inverter is a sine wave current, called alternating current. When the DC power of the solar cell is converted to AC power, our household equipment can use it to operate normally.

What is a solar cell?
Solar cell is a prismatic or rectangular device that can convert light energy from the sun into electrical energy. This energy generation process will occur through the photovoltaic effect. Solar cells are the simplest form of pn junction diodes, whose electrical characteristics change with exposure to the sun. Solar cells are photovoltaic or photovoltaic cells, which operate with photovoltaic effect to generate direct current. When these cells are combined, they form a solar module.

A single solar cell can only produce a small amount of current. A single solar cell can only produce an open-circuit voltage of about 0.5 V DC.

Therefore, when you combine multiple solar cells in one direction and plane, you create a module. They can also be called solar panels. When a single solar cell is combined into a panel, we can use a lot of solar energy.

Parameter

Model LS		10212/24/48 (102)	15212/24/48 (152)	20212/24/48 (202)	30224/48 (302)	40224/48 (402)	50248 (502)	60248 (602)
Rated Power		1000W	1500W	2000W	3000W	4000W	5000W	6000W
Peak Power（20ms)		3000VA	4500VA	6000VA	9000VA	12000VA	15000VA	18000VA
Start Motor		1HP	1.5HP	2HP	3HP	3HP	4HP	4HP
Battery Voltage		12/24/48VDC			24/48VDC	24/48VDC	48VDC
Size(LWHmm)		500300140				530335150
Packing Size(LWHmm)		565395225				605430235
N.W.(kg)		12	13.5	18	20	22	24	26
G.W.(kg)（Carton Packing）		13.5	15	19.5	21.5	24	26	28
Installation Method		Wall-Mounted
Parameter
Input	DC Input Voltage Range	10.5-15VDC（Single battery voltage）
	AC Input Voltage Range	85VAC~138VAC（110VAC） / 95VAC~148VAC（120VAC） / 170VAC~275VAC（220VAC） / 180VAC~285VAC（230VAC） / 190VAC~295VAC（240VAC）
	AC Input Frequency Range	45Hz~55Hz(50Hz) / 55Hz~65Hz(60Hz)
	Max AC charging current	0~30A(Depends on model)
	AC charging method	Three-stage (constant current, constant voltage, floating charge)
Output	Efficiency(Battery Mode)	≥85%
	Output Voltage(Battery Mode)	110VAC±2% / 120VAC±2% / 220VAC±2% / 230VAC±2% / 240VAC±2%
	Output Frequency(Battery Mode)	50/60Hz±1%
	Output Wave(Battery Mode)	Pure Sine Wave
	Efficiency(AC Mode)	>99%
	Output Voltage(AC Mode)	110VAC±10% / 120VAC±10% / 220VAC±10% / 230VAC±10% / 240VAC±10%
	Output Frequency(AC Mode)	Tracking Automatically
	Output waveform distortion (Battery Mode)	≤3%（Linear load）
	No load loss(Battery Mode)	≤0.8% rated power
	No load loss(AC Mode)	≤2% rated power（ charger does not work in AC mode）
	No load loss (Energy saving Mode)	≤10W
Battery Type	VRLA Battery	Charge Voltage :14.2V; Float Voltage:13.8V（Single battery voltage）
	Customize battery	Charging and discharging parameters of different types of batteries can be customized according to user requirements (charging and discharging parameters of different types of batteries can be set through the operation panel)
Protection	Battery undervoltage alarm	Factory default: 11V（Single battery voltage）
	Battery undervoltage protection	Factory default: 10.5V（Single battery voltage）
	Battery overvoltage alarm	Factory default: 15V（Single battery voltage）
	Battery overvoltage protection	Factory default: 17V（Single battery voltage）
	Battery overvoltage recovery voltage	Factory default: 14.5V（Single battery voltage）
	Overload power protection	Automatic protection (battery mode), circuit breaker or insurance (AC mode)
	Inverter output short circuit protection	Automatic protection (battery mode), circuit breaker or insurance (AC mode)
	Temperature protection	>90°C（Shut down output）
Alarm	A	Normal working condition, buzzer has no alarm sound
	B	Buzzer sounds 4 times per second when battery failure, voltage abnormality, overload protection
	C	When the machine is turned on for the first time, the buzzer will prompt 5 when the machine is normal
Inside Solar controller (Optional)	Charging Mode	MPPT or PWM
	Charging current	10A~60A（PWM or MPPT）				10A~60A(PWM ) / 10A~100A(MPPT)
	PV Input Voltage Range	PWM: 15V-44V(12V System); 30V-44V(24V System); 60V-88V(48V System) MPPT: 15V-120V(12V System); 30V-120V(24V System); 60V-120V(48V System)
	Max PV Input Voltage(Voc) (At the lowest temperature)	PWM: 50V(12V/24V System ); 100V(48V System) / MPPT: 150V
	PV Array Maximum Power	12V System: 140W(10A)/280W(20A)/420W(30A)/560W(40A)/700W(50A)/840W(60A）/1120W(80A)/1400W(100A）; 24V System: 280W(10A)/560W(20A)/840W(30A)/1120W(40A)/1400W(50A)/1680W(60A)/2240W(80A)/2800W(100A; 48V System: 560W(10A)/1120W(20A)/1680W(30A)/2240W(40A)/2800W(50A)/3360W(60A)/4480W(80A)/5600W(100A）
	Standby loss	≤3W
	Maximum conversion efficiency	>95%
Working Mode		Battery First/AC First/Saving Energy Mode
Transfer Time		≤4ms
Display		LCD
Thermal method		Cooling fan in intelligent control
Communication		RS485/APP（WIFI monitoring or GPRS monitoring）
Environment	Operating temperature	≤55dB
	Storage temperature	-10℃~40℃
	Noise	-15℃~60℃
	Elevation	2000m（More than derating）
	Humidity	0%~95% ,No condensation

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER2

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER3

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER4

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER5

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER6

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER7

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER8

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER9

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER10

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER11

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER12

DKLS-WALL TYPE PURE SINGLE WAVE INVERTER13

What service we offer?
1. Design service.
Just let us know the features you want, such as the power rate, the applications you want to load, how many hours you need the system to work etc. We will design a reasonable solar power system for you.
We will make a diagram of the system and the detailed configuration.

2. Tender Services
Assist guests in preparing bid documents and technical data

3. Training service
If you a new one in the energy storage business, and you need a training, you can come our company to learn or we send technicians to help you to train your stuff.

4. Mounting service& maintenance service
We also offer mounting service and maintenance service with seasonable & affordable cost.

5. Marketing support
We give big support to the customers who agent our brand "Dking power".
we send engineers and technicians to support you if necessary.
we send certain percent extra parts of some of the products as replacements freely.

What is the minimum and max solar power system you can produce?
The minimum solar power system we produced is around 30w, such as solar street light. But normally the minimum for home use is 100w 200w 300w 500w etc.

Most of people prefer 1kw 2kw 3kw 5kw 10kw etc for home use, normally it is AC110v or 220v and 230v.
The max solar power system we produced is 30MW/50MWH.

How is your quality?
Our quality is very high,because we use very high quality materials and we make rigorous tests of the materials. And we have very strict QC system.

Do you accept customized producing?
Yes. just tell us what you want. We customized R&D and producing energy storage lithium batteries, low temperature lithium batteries, motive lithium batteries, off high way vehicle lithium batteries, solar power systems etc.

What is the lead time?
Normally 20-30 days

How you guarantee your products?
During the warranty period, if it is the product reason, we will send you replacement of the product. Some of the products we will send you new one with next shipping. Different products with different warranty terms. But before we sending, we need a picture or video to make sure it is the problem of our products.